overclock using intel extreme tuning utility 7700k

Like failing the benchmark/stress test in Realbench or more likely a complete freeze up or BSOD if you are trying to push it as far as the chip will go. Then just keep following that raise a little, test, monitor model till you get to a speed you are happy with or start have instabilities. a 40 multiplier gives you 4.0GHz or a 45 multiplier gives you 4.5GHz. I should mention with the core clock multiplier, using 40 as an example, the 1st number represents GHz & the 2nd number represents MHz. If it passes & the CPU/system temps are still low enough you can raise the multiplier a little more, say an extra 200 to 300MHz. Use CPU-Z to stress the CPU & see if it is actually boosting to 4GHz, if it is run 4 or 5 loops of the Realbench benchmark to test the stability, keep a close on your temps while doing this. I wouldn't go to crazy at 1st, maybe try a X40 multiplier which will let the CPU boost to 4GHz. The next step would be to start raising your core clock multiplier.

I would start by seeing what your stock voltage reaches under load & then manually set it to the same value. Higher voltages are not what you want with a laptop. Since it seems to be a good tool that covers a wide range of usage scenarios which strikes a nice balance between real world usage & balls to wall stressing.įor the OCing itself you'll want to set a manual voltage, since auto voltage will most likely go up with higher multipliers. For that ROG Realbench is what I recommend. Also you'll need a decent benchmarking/system stressing tool to test for stability after applying an OCs. TBH though I am not 100% sure about that so trying can't hurt.īefore you try to OC though make sure you have a decent system monitoring tool, I really like using a combo of HWinfo64 & CPU-Z to monitor my CPU when testing OCs.

the sliders are there in XTU & you can even adjust them but they will have no effect. With a HQ you may not be able to OC it, i.e.

Overclock using intel extreme tuning utility 7700k